Gorbel 1 Ton Wall Bracket Jib Crane 14 Foot Span
|Manufacturer Part Number||WB100-G1-14-W8-001T-014|
|Lift Capacity||1 Ton|
|Height Under Boom (HUB)||n/a|
|Mounting Type||Wall / Column Mount|
|Degrees of Rotation||200°|
Gorbel's WB100 wall bracket jib crane is their most economical heavy duty jib crane option.
These jibs cranes are designed to provide coverage in individual works cells or bays, either along a wall or on columns in a plant. They can be used on their own or to supplement overhead cranes or monorail systems.
Two important requirements must be met before installing the Wall Bracket Series:
- A structurally adequate wall or column to support the jib crane must exist
- Sufficient clearance above the boom throughout its arc to accommodate the tie rod suspension must exist.
General Jib Crane Information
Mounting Style: WB100 Wall Bracket
Rated Capacity: 1 Ton
Span: 14 Ft
Flange Width: 5.25 in
Crane Color: Yellow
Bracket Fitting Size: G1
Overturning Moment: 8.481 Kips
Axial Load: 3.052 Kips
Thrust and Pull: 8.481 Kips
Bracket Centers: 4 Feet 6 Inches
- Boom Assembly
- Wall Brackets
- End of Beam Bracket
- Tie Rod
Hoist Allowance: The total hoist allowance is 15% of the capacity or 150 lbs maximum.
Mounting Requirements: Mounting hardware is not supplied by Gorbel or Jibcranes.com and must be purchased separately. A structurally adequate wall or column is required to support the jib. Please consult a structural engineer or your building manufacturer to ensure that adequate support structure is available.