Gorbel 500 lbs Workstation Jib Crane Kit with Hoist 10 ft HUB 6 ft Span 230v Single Speed
Gorbel 500 lbs Workstation Jib Crane Kit with Hoist 10 ft HUB 6 ft Span 230v Single Speed
This kit has everything you need to get up and running quickly. It includes the Jib Crane, Hoist and all the mounting hardware.
Weight | 461.800000 |
---|---|
Manufacturer | Gorbel |
Mounting Type | Freestanding |
Lift Capacity | 500 lbs. |
Height Under Boom (HUB) | 10 Feet |
Lift Height | 20 ft. |
Span | 6 Feet |
Lift Speed | 24 ft./min. |
Voltage | Three Phase 230 |
Degrees of Rotation | 360° |
Pendant Speeds | One Speed |
Color | Gorbel Blue |
Everything you need to get up a running. This Kit includes the Jib Crane and Hoist as well as all the mounting hardware.
Gorbel's Workstation Jib Crane Advantage:
Easy Movement
Gorbel Work Station Jib Cranes are easier to move and position than traditional I - beam jibs. The enclosed track design keeps rolling surfaces clean and contributes to easier movement and longer life. The track's low weight - per - foot reduces the dead weight of the boom. Gorbel enclosed track profiles feature 2° taper in the lower running flange, which helps to center the trolley in the track, increase wheel life and allow smooth rolling of the trolleys.
Unsurpassed Ease of Rotation
Steel enclosed track workstation jibs weigh less and rotate easier than traditional I - beam cranes.
Precise Load Positioning
Hoist trolleys feature low rolling resistance and lubricated-for-life sealed bearings. This combined with easy rotation of the boom help to position and spot loads with precision.
Standard Jib Features
- Festoon Gliders
- Festoon Clamp
- Rotation Stops
- Anchor Bolts
- Anchor Bolt Epoxy
- Epoxy Dispenser
- Festoon Wire is Not Included
Standard Hoist Features
- Two Button Pendant
- Direct acting upper and lower limit switches
Foundation Requirements: Centered on a square foot area that is free from cracks, seams, and walls. Reinforced Concrete with Pressure of 3000 psi and Soil Pressure of 2500 psf. Chemical anchor bolts to withstand a minimum of 3,470 lbs. of pull out force. Concrete must contain wire mesh reinforcement
Installation Manual Crane Drawing Hoist Drawing