Gorbel 1 ton Aluminum Wall Mount Jib Crane 8 ft Span
|Manufacturer Part Number||AL100-G1-2000-8|
|Lift Capacity||1 Ton|
|Height Under Boom (HUB)||n/a|
|Mounting Type||Wall / Column Mount|
|Degrees of Rotation||200°|
Gorbel's AL100 Aluminum Tie Rod Jib Crane is the easiest to move wall mounted jib crane. The aluminum enclosed track makes the AL100 40% easier to move than a comparable I-Beam Jib
These jib cranes are designed to provide coverage in individual works cells or bays, either along a wall or on columns in a plant. They can be used on their own or to supplement overhead cranes or monorail systems. The light duty low cost of the Workstation jibs can even be mounted directly to machines to allow easy removal of parts or changing of dies.
Workstation Jib cranes feature an enclosed track for the boom assembly, which reduces dead weight for easier rotation when compared to traditional I-beam jib cranes.
The AL100 also includes the trolley for the enclosed track saving you the cost of buying a separate hoist trolley.
Two important requirements must be met before installing the Wall Bracket Series:
- A structurally adequate wall or column to support the jib crane must exist.
- Sufficient clearance above the jib crane throughout its arc to accommodate the boom must exist.
General Jib Crane Information
Mounting Style: AL100 Aluminum Tie Rod
Rated Capacity: 2,000 Pounds
Span: 8 feet
Track Series: 2000
Crane Color: Aluminum
Bracket Fitting: G1
Axial Load: 2.8816 Kips
Thrust and Pull: 5.332 Kips
Bracket Centers: 4 Feet 0 Inches
- Boom Assembly
- Wall Brackets
- Hoist Trolley
- End of Beam Bracket
- Tie Rod
Hoist Allowance: The total hoist allowance is 15% of the capacity or 300 lbs maximum.
Mounting Requirements: Mounting hardware is not supplied by Gorbel or Jibcranes.com and must be purchased separately. A structurally adequate wall or column is required to support the jib. Please consult a structural engineer or your building manufacturer to ensure that adequate support structure is available.