We Are Your Service Company

Request A Quote

Call (800) 509-6131 or Email Us

Fall Protection

Fall protection is a must.

Inadequate fall protection is one of the most common causes of serious work related injuries and death. It is the employer's responsibility to prevent employees from falling off of elevated work stations, overhead platforms, or into holes in the floor and walls.

When you need fall protection.

OSHA requires that fall protection must be set up and available for the following work elevations:

  • Four feet in general industry workplaces
  • Five feet in shipyards
  • Six feet in the construction industry
  • Eight feet in longshoring operations

​In addition, OSHA requires fall protection, regardless of the elevation, when working over hazardous or dangerous equipment and machinery.

Tether Track Fall Protection Systems

Put your workers' safety on the right track.

Protecta Rebel Web Self Retracting Lifeline

Lifelines and Lanyards

The selection of a proper lanyards and lifeline is an essential part of an effective fall protection system.

fall protection harness


Fall protection harnesses are an essential part of a fall protection system.

Why you need fall protection.

Most people understand the danger of working form great heights, but at lower heights people often underestimate the risks. Every year hundreds of preventable injuries occur from falling accidents. Safety should be the priority of every business and there are numerous ways to keep workers safe when working off of the ground.

Fall protection citations are one of OSHA's most common concerns. Make sure you aren't cited by having the proper fall protection.

Types of fall protection.

There are a variety of fall protection products, including:

  • Tether track systems
  • Lifelines
  • Lanyards
  • Harnesses
  • Fall limiters

Almost all fall protection gear is made up of 4 key parts.

Components of fall protection

  1. The anchorage and anchorage connector - The anchorage is usually referred to as the tie-off point. An example of an anchorage would be an I-beam or an engineered fall protection system like a Gorbel Tether Track System.

  2. The anchorage connector - The anchorage connector is used to pair the connecting device to the anchorage.

  3. The connecting device - The connecting device is the link that joins the body wear to the anchorage connector. Examples are a retractable lifeline or a shock-absorbing lanyard (shown above).

  4. The body wear - The body wear is the protective equipment worn by the worker also known as a fall protection Harness