1 ton QLP Single Girder Under Running Push Crane Kit by R&M-16 ft/min-10 ft.
1 ton QLP Single Girder Under Running Push Crane Kit by R&M-16 ft/min-10 ft.
QLP Push Crane Packages are pre-engineered, complete crane component packages utilizing cutting edge technology including the innovative LoadMate® electric chain hoist, push style end trucks, and the well-regarded C-track festoon system - complete with a plug and play power cable.
Brochure Crane Drawing Technical DocumentWeight | 445.000000 |
---|---|
Manufacturer | RM Material Handling |
Bridge Span | 10 ft. |
Lift Capacity | 1 Ton |
Trolley Type | Push |
Voltage | Three Phase 460 |
Lift Height | 10 ft. |
Lift Speed | 16 ft./min. |
1/2 - 2 Ton Capacities
QLP Push Crane Packages are pre-engineered, complete crane component packages utilizing cutting edge technology including the innovative LoadMate® electric chain hoist, push style end trucks, and the well-regarded C-track festoon system - complete with a plug and play power cable.
- Single girder under running or single girder top running configurations
- 1/2 ton - 2 ton capacities
- Standard crane spans up to 30 ft.
- Push type hoist trolley, and push type bridge end trucks
- LoadMate electric chain hoist with plug-in pushbutton pendant and power cable plug
- Single speed, or two-speed hoist controls
- Festoon package that also includes bolt-on end stops for the hoist trolley
- Optional crane tow arm
- Indoor service
Festoon System:
The festoon system for the QLP Push Crane Packages comes complete with a plug and play power cable, galvanized C-track, and cable trolleys, making the festoon system dependable, long lasting, and virtually trouble free.
- PVC flat cable - UL listed and CSA approved with a temperature range of -31ºF to +221ºF (-35ºC to +105ºC)
- Suspended from galvanized steel C-track
- Galvanized steel cable trolleys with steel and plastic cable supports
- Cable plug connection (hoist end only) makes installation and repair simple and fast, saving expensive down time and the cost of an electrician.
- Pre-engineered to meet the specified span + cable trolleys pre-assembled to the cable
End Trucks:
- Fully assembled end trucks that feature pre-lubricated, antifriction wheel bearings for smooth, easy starts under load, and include the mandatory safety lugs.
- Wheelbase-to-span ratio to meet CMAA and FEM standards
- Robust bolt-together girder connection to simplify assembly - does not normally invovle additional end brackets that connect to the girder and end trucks.
Chain Hoist Specifications | End Truck Specifications | Festoon Specifications |
Model LM05 - 1 fall Height of Lift: 10ft Hoist Duty: ASME H4 Hoist Speed: 16 fpm. / (optional 32 fpm.) Trolley: Push Voltage: dual rating (ships 460v) unless specified in notes Weight 74 lbs. |
Model: UR-2-30 Wheelbase: 3' - 9" Wheel Diameter: 4" Weight per endtruck: 121 lbs. |
Hoist Power Cable type: FC1204 FLAT Distance Between Cable Trolleys: 6' - 0" Cable trolley type: KC-023261 Extra Cable Length: - Runway Elec: 6' - 0" Extra Cable Length Hoist End: 6' - 0" Main Girder Max Flange thickness: 1" |
Span | Suggested Bridge Beam | Bridge Beam Flange Width |
10' - 0" |
W12 x 26-MatA992 S10 x 25.4 |
6 1/2" 4 5/8" |
20' - 0" |
W12 x 26-MatA992 S10 x 25.4 |
6 1/2" 4 5/8" |
30' - 0" |
W12 x 40-MatA992 S15 x 42.9 |
8" 5 1/2" |
Included in QLP Package
- Chain Hoist with Chain container
- End Trucks
- Hoist Electrification
- Festoon System including:
- Flat Cable + Plug connector (hoist only)
- Cable Trolley (fastened to Cable)
- C-Track
- Clamps for C-track
- C-track Suspension
- Bolt On End Stops for Trolley
Not Included in QLP Package
- Manual Disconnect
- Main Girder
- Runway system